Error E 91 or E91 on Epson printers

Error code E-91 means the waste ink counter is full. It had to be resetted in order to fix the problem.

For some Epson printers, the software SSC Utility can reset the counter.

Epson Artisan series Artisan 700, Artisan 725, Artisan 800, Artisan 835, Artisan 837, EP-901A

Epson B and BX series B1100, B1110, B300, B300DN, B310, B310N, B40W, B42WD, B500DN, B510, B510DN, B510N, B518DN, BX300F, BX305FW, BX310FN, BX525WD, BX600FW, BX610FW, BX620FWD, BX625FWD

Epson Stylus C series C20, C40, C41, C42, C43, C44, C45, C46, C58, C59, C63, C64, C67, C68, C70, C76, C77, C78, C79, C80, C82, C83, C86, C87, C88, C90, C92, C93, C94, C95, C97, C98, C99, C110, C120, C480, C560, C660, C670, C680, C777, C880, C888

Epson Stylus CX series CX1390, CX1500 ,CX1600, CX2800, CX2900, CX3100, CX3200, CX3300, CX3400, CX3500, CX3600, CX3650, CX3700, CX3800, CX3805, CX3810, CX3900, CX4000, CX4100, CX4200, CX4500, CX4600, CX4700, CX4800, CX4850, CX4900, CX5100, CX5400, CX5500, CX5505, CX5700, CX5900, CX6300, CX6400, CX6500, CX6600, CX6900, CX6900F, CX7300, CX7400, CX7450, CX8300, CX8400, CX8450, CX9300F, CX9400F, CX9500F

 Epson Stylus D series D68, D82, D88, D92, D120

Epson Stylus DX series DX3800, DX3850, DX4000, DX4050, DX4200, DX4250, DX4400, DX4450, DX4800, DX4850, DX5000, DX5050, DX6000, DX6050, DX7300, DX7400, DX7450, DX8400, DX8450

Epson Stylus EP series EP-801A, EP-803A, EP-901A, EP903A

Epson Stylus K and L series K100, K200, K300, L100, L200, L300 Epson ME Office Series ME2, ME20, ME30, ME32, ME-B40W, ME70, ME80W, ME82WD, ME200, ME300, ME320, ME340, ME360, ME510, ME520, ME530, ME535, ME560, ME570, ME600F, ME620F, ME650N, ME650N, ME900WD, ME960FWD, ME1100

 Epson NX Series (See TX Series) NX100, NX110, NX111, NX125, NX127, NX200, NX205, NX210, NX215, NX220, NX300, NX305, NX310, NX315, NX400, NX405, NX410, NX415, NX420, NX430, NX510, NX515, NX620

 Epson PictureMate (PM) Series PM100, PM210, PM215, PM225, PM235, PM240, PM250, PM260, PM270, PM280, PM290, PM310, PM500, PM-A820, PM-A890, PM930C, PM-A950, PM-A970, PM970C, PM-G800, PM-G820, PM-D800, PM-3500C, PM,G4500, PM-G5000

Epson PX series PX600W, PX600FW, PX640, PX650, PX659, PX660, PX700W, PX700W, PX720WD, PX800FW, PX800FWD

Epson R series R200, R210, R220, R230, R240, R245, R250, R260, R265, R270, R275, R280, R285, R290, R295, R300, R310, R340, R350, R360, R365, R380, R390, R395, R520, R800, R1380, R1390, R1400, R1800, R1900, R2400, R2800, R3880, R4880, R7880

Epson RX series RX420, RX425, RX430, RX500, RX510, RX520, RX530, RX560, RX565, RX580, RX585, RX590, RX595, RX600, RX610, RX615, RX620, RX625, RX630, RX640, RX650, RX680, RX685, RX690, RX700 297

Epson S series S20, S21, S22

Epson Stylus Photo series: P50, P60, 870, 890, 1270, 1290, 1390, 1400, 1410, 1420, 2000P, 2100, R7880

Epson Stylus Pro Stylus Pro 7000, Stylus Pro 9000, Stylus Pro 9600

Epson Stylus SX series SX100, SX105, SX106, SX110, SX111, SX115, SX117, SX125, SX130, SX200, SX205, SX210, SX215, SX218, SX230, SX235, SX400, SX405, SX410, SX415, SX420W, SX425W, SX430W, SX435W, SX510W, SX515W, SX525WD, SX550W, SX600FW, SX610FW SX620FW

Epson T Series T10, T11, T13, T20, T20E, T21, T22, T23, T24, T25, T26, T27, T30, T31, T33, T40W, T42W, T42WD, T50, T59, T60, T80W, T1100, T1110

Epson TX series TX100, TX101, TX102, TX103, TX105, TX106, TX109, TX110, TX111, TX115, TX116, TX117, TX119, TX120, TX121, TX125, TX135, TX200, TX205, TX209, TX210, TX219, TX220, TX230, TX235, TX300F, TX320F, TX400, TX405, TX408, TX409, TX410, TX415, TX419, TX420, TX420W, TX510FN, TX550W, TX560WD, TX600F, TX600FW, TX600W, TX610FW, TX620FWD, TX640, TX650, TX659, TX660, TX700W, TX700FW, TX720WD, TX800W, TX800FW, TX820FWD

Epson WorkForce series 30, 40, 42, 60, 310, 315, 323, 500, 600, 610, 615, 620, 625, 630, 635, 1100, WF-7011, WF-7015, WF-7511 WF-7515, Pro-WP-4511, Pro-WP-4521, Pro-WP-4530, Pro-WP-4540

Epson: L100, L200, P50, P60, T50, T60, Pro 7000, Pro 9000, Pro 9600

How To fix Canon printers Error P22

Canon printers Error P22 or P,2,2 is a scanner error.

Procedure 1:

Power off the printer

unplung the power cord

Wait 5 minutes

Plug in the power cord

Switch on the printer

Procedure 2:

If the printer is still under warranty, contact the Canon support.

Procedure 3:

The scanner unit or the logic board is defective.

How to Reset Canon MP287 Printer error E08

FIX PRINTER ERROR "The Ink Absorber is Almost Full" When the canon MP287 is turned on, it will display error E08 on the LCD panel of the printer. 

And if give print command, the computer will display error "The Ink Absorber is Almost Full". 


How to Reset MP287 Canon error E08

     Step1. Turn on Printer Canon MP287, LCD panel then will appear E08 error, and error "The Ink Absorber is Almost Full" will display on computer.
     

     Step

2. Download the Resetter of canon MP287 NOW.

Service Tool Download here.

     

     Step

3. Get printer in SERVICE MODE.

     

     Step

4. Turn off the Canon MP287 by pressing the power button. Do not unplug the power cord.

     

     Step

5. Press and Hold the STOP / RESET and POWER button.

     

     Step

6. Remove the STOP / RESET but do not release the button POWER.

     

     Step

7. press the STOP / RESET 6 times.

    

     Step

8. Then release both buttons simultaneously. The Canon MP287 will be in Service Mode.

    

     Step

9. LCD Panel MP287 will blank / dark and your computer will detect the new hardware. Ignore it ...

    

     Step1

0. The next step Extract and Run Service Tool for canon MP287.

    

     Step

11. menu -> absorber Clear ink counter select -> SET to the right.And Do the other steps on the tool.

     

     Step

12. Printer Canon MP287 will be normal again.

Solve Error 5200 Canon iP2770

Canon iP2770 printer is an economical printer and Canons latest output from the vendor. Like his brothers before, Canon iP2770 printer is also not immune from error problems lately started to emerge and much discussed, especially in cyberspace.

One problem is the iP2770 printer error 5200 on the exit time will start the print process. And if the calculated amount of 8x blinkingnya orange 1x green. How do I fix this?

Indications iP2770 error 5200:

At the iP2770 printer is turned on, this printer will initialize berkedipnya marked with green LED lights up green led is full. It looks normal printer iP2770 with this green LED turn on. But at the time of the test print or print the document, the printer suddenly stops and error 5200 appears on the screen we are. And the printer will have a blinking green orange 1x 8x.

Cause iP2770 error 5200:

This printer cartridge for black type PG810 and CL811 cartridges for color. Apparently the second cartridge has a pressure sensor temperature. And if the pressure sensor detects the temperature of one cartridge turns out there is a problem, then the iP2770 printer will display an error message 5200. on the screen. And in fact that is often problematic is the color cartridge CL811.

How to Solve Error 5200 Canon iP2770:

First way:

This method is the easiest way, but spend a lot of money that is by replacing the iP2770 the color cartridge error 5200, then the problem was resolved.

Second way:

IP2770 printer is turned off with an electric cord attached.

Press the RESUME button and hold 2 seconds, then press the POWER button until the green LED flame.

Then release the Resume button, but do not release the button POWER.

POWER button while still depressed, press the Resume button 5 times. Led will flash alternately orange glow green with orange last.

IMPORTANT: not to mistakenly press RESUME 4 times only, because the printer will die completely, but it is temporary. If this happens, disconnect the USB cable and power cord. Let stand for 2-4 hours, then try your printer.

Release both buttons simultaneously.

Green LED will flash briefly and then going full flame.

And the computer will detect new hardware, ignore it.

Press the POWER button, then the printer will die.

Press the POWER button again it will flame and iP2770 printers that had the error 5200 is ready for use again.

Oya iP2770 how to resolve error 5200 that we described, is temporary until power is removed. So if the power disconnected then the iP2770 will be error 5200 again. And how to overcome that is repeat the above steps.

Good luck!

Canon Error 5100 How to fix

There is really nothing quite as annoying as asking your expensive Canon MP printing device to print an important document and seeing an error code 5100 pop up instead of the neatly printed paperwork you need. Understanding the reason for the error code and what steps you should take to resolve the issue can have you back on track with your newly printed page-fast. 
Error message: the LED light blinks twice (2xs) and displays: "Error 5100 An error occurred in the carriage encoder signal".

Lets march down the troubleshooting path and look at probable solutions and how to reset Canon error code 5100. The first thing that you should do with a printer error of any type is try to reset the Canon MP printer. Occasionally an error code is a matter of a crossed signal between the Canon ink jet printer and the computer. Rebooting the Canon pixma printer might fix the problem with no more fuss.

1) Clear debris from carriage head
Open the Canon printer and look closely for any debris such as small pieces of paper or dirt lodged inside. If such debris is found, remove it, plug Canon pixma back in and see if error code has cleared. 

2) Lubricate the purge cap
If the Canon printer has excess dirt or dust you can use a damp lint free paper towel to gently clean the Canon printer. Once device is cleaned plug it back in and see if error code 5100 has cleared. If cleaning and clearing the device does not work then you may need to lubricate the purge cap.The purge cap is the sliding mechanism that the printer head parks into when it is not in use. To lubricate it you will need to remove the right panel from the devise. Once the panel is removed rub a little white grease along the sliders while taking care not to get any grease on the small wipers or the black caps. Once this is done, replace the panel, plug devise back in and see if the error code 5100 has cleared.

3) Paper Jammed
Odds are greatest a rogue piece of paper has nested itself in like a rat in a haystack. The solution is to remove all ink cartridges and hit it with canned air, or any other filtered air blower.

4) Set the ink cartridges properly
Less likely, and yet still possible is your ink cartridges need to be re-seated. If you follow the step above, after cleaning youll be re-seated the cartridges anyway.

5) Clean the Timing film
The timing film is a thin piece of plastic which runs across the width of the devise below the drive belt. It has fine vertical lines running along it and if it becomes dirty then your printer will display an error 5100 message. To clean use a damp lint free paper towel and gently wipe it off. Once strip has been cleaned, plug the devise back in and see if the error message has cleared.
Corrupt printer driver results in Canon Error Code 5100
If you have gone through all this and still you have no joy, chase down the latest, greatest print driver and reinstall. Printer driver corruption while low on the odds list, can be quite vexing.

How to reset Canon Error Code 5100

• Turn off the printer
• Unplug the printer power cable
• Press and hold the power button, and restore the power (a strip with a switch makes this simpler*). Depending on your firmware, you may have to also press and hold the resume button, simultaneously. You may get a one buzz sound.
• While continuing to press the power button press the resume button twice, in short bursts.
• Release the power button.
• Again, depending on the firmware, you may have to press the resume button three more times, and then the power button once. If you got a single buzz before, you should get one again, indicating you have exited programming the firmware. The printer will then switch off.

Plan B to reset Canon Error 5100
There is a plan B however, it is at your own risk. Some clever Russian engineers have coded up Canon printer Resetters that can be downloaded. The software can create test patterns, cleaning, EEPROM dumps. Clearing waste counters and much more. And in these days of malware, I think more than twice about downloading free software from sources I dont completely trust.
If all of the above steps do not clear your printer of the error 5100 error then it is possible the logic board assembly or carriage motor has gone bad. If this is the case then you will need to either send the unit in for repairs or replace the machine.

Printer Canon Pixma MP258 – Error P08

First time, I found the problem Canon Pixma MP258 printer will not print from the cpu or the Copy Scan and P08 are the error messages on the printer panel. I could maybe try to reset, e turned out to be, then I created to copy directly, it was also error.

I've lost both cartridges, the ink was discharged, directly, I refill the black  and a color cartridge. Then I do a test print and the result is smooth and good wow.

If this error P08 does not clear, please 

Follow the instructions step by step

1. Turn off printer, cable power still plug in,
2. Press Stop/Reset button  don't release
3. Press Power Button don't release and than release Stop/Reset button
4. Press Stop/Reset button 2X and than release Power Button, wait until service mode to " 0 "
5. Turn off printer, cable power still plug in
6. Press Stop/Reset button  don't release
7. Press Power Button don't release and than release Stop/Reset button
8. Press Stop/Reset button 4X and than release Power Button, wait until service mode to " 1 "
9. Turn off printer, and loose cable power, wait one minute.
10. Connect cable power, turn on printer again, now this printer ready to use.