Resetter Printer: 2008

Senin, 27 Oktober 2008

Rabu, 10 September 2008

Kamis, 04 September 2008

EPSON RX500 reset procedure

Protection counter is the counter for wasted ink; it says to printer how much space it has in special tray where all wasted ink are going during cleaning procedures. With time it became full (printer just won't print in this case) and absorbtion padding must be replaced. After replacing the padding You must reset the protection counter to zero in order to continue ordinary printing.

EPSON RX500 reset procedure

Press all following buttons :Power, Load/Eject, Stop, B&W, Color,
after this printer turns on and you'll see "Init eeprom" on printer screen.
Press Color button to clear protection counter.

Alternate. Hold down "clear + setup + on"
Continue to hold the buttons until the printer had powered on, then off again, then back on. Once you noticed that the LCD had flashed a blank screen, let go of the 3 keys. In the LCD window you now have access to 3 options using the select keys.

Look for an abbreviation resembling "ink pad level" . Here is where Held down the clear button for around 10 seconds. LCD must read "Press Power to Reset."

Selasa, 03 Juni 2008

Resetter Printer

Jumat, 14 November 2008

Resetter Epson R390

Senin, 10 November 2008

Resetter Epson C90

Senin, 27 Oktober 2008

Resetter Epson cx9300

Resetter Epson CX8300

Resetter Epson cx7300

Senin, 20 Oktober 2008

Epson CX6900f Resetter

Rabu, 10 September 2008

Reset Epson C110

Kamis, 04 September 2008

EPSON RX500 reset procedure

Rabu, 27 Agustus 2008

Resetter SP1390

Selasa, 15 Juli 2008

Resetter Epson R290

Kamis, 26 Juni 2008

Reset Canon

Selasa, 03 Juni 2008

Reset Epson CX5500

Epson CX6500 reset procedure

Total Tayangan Halaman