Resetter Canon iP1600

Waste Ink Counter Reset.

Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect the printer cable.
4. Close door, then release power button.

step 2 : Software iP1600ServiceTool for Permanant
1. Open General Tools software
2. Select (USB PORT)
3 .Click DEVICE ID
4. Select EEPROM CLEAR
5. Click TEST PATTERN 1
6. Turn off the printer

Reset Epson C58

FREE ... download Epson C58 adjustment



FREE ... download Epson C58 adjustment

Reset cx6500

How to reset Epson CX6500 or any multifunction:

• Press and hold B/W+COLOR+STOP


• Push power on button, don’t release all the button until you see the light indicator is blinking and then a message display on the LCD


• Release your fingers from the button


• Press the COLOR button to clear protection counter


• Press power button (turn off)


• DONE!

CX1500 resetter

Free resetter Epson CX1500
Download here

Free resetter Epson CX1500
Download here

Reset Canon i6100

Reset Canon i6100

• Turn off the printer.
• Press and hold the RESUME button, then press and hold the POWER button.
• Release the RESUME button, next press and release the RESUME button two(2) more times in succession, then release the POWER button.
  
• Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.
  

1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point – However it is best leave them unaltered – You have been warned!)
   

MPC 110 RESET PROCEDURE

How to reset MPC 110/130
* Turn On the printer
* Press "MENU - SCAN - COPY - SCAN"
* Press +
* NVRAM ACCESS press OK
* Press -
* SET ABS-P LEVEL press OK
* Reset level press +
* Press OK
* Press -
* SET ABS-M LEVEL press OK
* Reset level press +
* Press MENU and EXIT
* Turn off the printer

Resetter Epson cx4100

Epson cx4100 resetter




Epson cx4100 resetter

Canon IP1700 Ink waste resetter

Free resetter
Freeeeeeee.......

Canon IP1700 Ink waste resetter
http://www.divshare.com/download/2612818-f02

Canon IP1700 Ink waste resetter
http://www.divshare.com/download/2612818-f02

Disclaimer

Privacy
The owner of this blog does not share personal information with third-parties nor does the owner store information is collected about your visit for use other than to analyze content performance through the use of cookies, which you can turn off at anytime by modifying your Internet browser’s settings. The owner is not responsible for the republishing of the content found on this blog on other Web sites or media without permission.

Blog Comments
The owner of this blog reserves the right to edit or delete any comments submitted to this blog without notice due to;

1. Comments deemed to be spam or questionable spam


2. Comments including profanity


3. Comments containing language or concepts that could be deemed offensive


4. Comments that attack a person individually

Terms and Conditions
All content provided on this blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.

This policy is subject to change at anytime.

Reset Canon iP 1880

This is how to reset Canon iP 1880 :
1. Press Resume button and hold for 1 - 2 minutes
2. Open the cover
3. Release the catridge and then put them on again
4. Close The Cover
5. Turn off the printer
6. Turn it on again.

Or you can use IPTool software to reset,
Step 1 : Manual for service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
5. Open Iptool then klik "Reset Main"

Download IPTool

CX2800 resetter

Epson CX2800 adjustment


Epson CX2800 adjustmentp

Canon mp150 reset codes

MP150/MP160 ERROR CODE
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full

E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

How to clear E27 Code

• With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
• When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
• When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
• When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

• Turn off the printer.( it must be turn off) then turn it on again.