How To Service My Printer - MISS / CISS Ink for Multifunction Printers installation guides

How To Service My Printer - MISS / CISS Ink for Multifunction Printers installation guides

• lift the scanner unit
• open the ink cartridge locking cover, put in the  cartridge and close back
• stick the tube support in the middle of printer
• move the cartridge left and right to test smoothness of the tube movement
• stick the clincher A and B to the tube
• do cleaning process to make sure prerfect print

 

How To Service My Printer - Maxprint Printer Guide for Multifunction Printers

 

How To Service My Printer - Maxprint Printer Guide for Multifunction Printers

MISS Guides

• Place the printer appropiate place
• open the ink cover and close it back please refer picture above
• dont raise up the ink system
• always turn on your printer 
• please see picture above for error code display at your printer
• tqvm

canon mx338 error 5b00

The waste ink absorber is full and is triggering error 5B00

 

How to Reset Canon MX338 with Resetter:

Entering Service mode Canon MX338:

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Permanent Reset Canon MX338:

1. After you download the resetter, extract it and double click “MX338.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.

Free Download Resetter Canon MX338